Description TheFike Control Panel Twinflexpro2 is a 2-wire intelligent fire alarm panel that operates using standard cabling. It is classified as Analogue Non-addressable and uses the Twinflex protocol for communication between the panel and devices. Available in 2, 4, or 8-zone models, the panel supports up to 32 Twinflex devices and can differentiate between heat detectors, smoke detectors, and manual call points. The panel continuously monitors each zone for detector head removal, device faults, end-of-line faults, and short or open circuit conditions. It includes two monitored outputs, configurable as sounder circuits or volt-free relays for common fire and fault signals. Additional features include two multifunction latching/non-latching inputs and one programmable monitored input for functions such as Class Change or Remote Fire activation. An integrated power supply supports two 12V 3.2Ah batteries, providing up to 72 hours of standby power. The panel also stores up to 500 events and can be programmed using either the onboard keypad or OSP PC software. With Fike Control Panel Twinflexpro2, compatibility is no longer limited to Fike devices—zones 5 to 8 can be configured to work with conventional devices, offering increased flexibility in system design. Control Panel Twinflexpro2 Features: Display with 4 lines and 20 characters Differentiate between a heat sensor, a smoke detector and / or manual alarms Alarm confirmation Choose from 2, 4 and 8-zone panel options Connect up to eight repeater panels with RS485 Highlighted selection menu Event Log storing 500 events Three enhanced Test Modes Allows for the installation of both detectors and sounders on the same wire pair Each zone can have up to 32 devices All devices have built-in EOL capabilities Seven modes of detection The zone can be configured for day/night detection Options for delay programming
